Signed in as:
filler@godaddy.com
MVALVE UNIQUE FEATURES
Air Condition Water Leakage Problem
Air Condition Water Leakage Problem
Air Condition Water Leakage Problem
With conventional, outdated U-traps, the risk of water leakage remains high, and even regular preventive maintenance cannot fully eliminate the problem.
When failures occur, the resulting collateral damage can be significant.
The Conventional U-trap
Air Condition Water Leakage Problem
Air Condition Water Leakage Problem
The conventional, outdated U-trap requires multiple PVC components, adhesive bonding, curing time, foam insulation, and sealing materials. Despite all this effort, it still fails to fully prevent pipe sweating or blockage. If aluminum insulation is used, the overall cost increases significantly without guaranteeing reliable performance.
The Same unit with MValve
Air Condition Water Leakage Problem
The Same unit with MValve
Notice the difference: The same unit with the expensive aluminum foam insulation and after installing MValve.
MValve offers a far simpler, fully transparent solution that is quick to install and easy to monitor. Operation is straightforward, and cleaning can be performed instantly—on demand, whenever required.
MValve unmatchable benefits
MValve Unique Features
- No more "blind" periodic and mandatory service
- Clean on Demand only
- No more frequent water leak
- No more gas or water pressure to flash the drain pipe
- No more pipe sweating
- No more foam insulation
- No more gluing
- No more water evaporation inside the u-trap resulting in bad smell infiltration
- Minimal Bacteria forming
- Better Indoor Air Quality (IAQ)
- Visual check anytime – no tools needed
- Air Condition Unit Health Indication (by looking at drain water color)
- 20 cm saving in false ceiling height for new AC unit installations
- Less frequent technician service visits
- One (1) technician can cover several locations and buildings since no more “blind service” is needed
- Replace every 3 years (depending on use)
Technical Advantages
- ISO Standard: Length 25 cm, Outer Diameter 25 mm, Wall Thickness 2.0 mm
- Water drain volume: up to 2 liters with standard 10 degrees slope
- Full transparent PVC allowing visual check anytime
- Rust and water proof
- No mechanical parts, virtually maintenance free
- Install with two standard straight connector or removable PVC pipes
- Installation time: less than 10 minutes!
- Can be placed anywhere on the drain line (recommended at 1/3 of pipe length for higher water velocity/speed and better flushing)
- Designed for FCUs up to 5 tons
From Blindness to Full Vision
Just Compare!
PVC drain pipes are typically available only in solid colors—black, grey, or white—making it impossible for anyone to see inside.
Servicing is often incomplete, with residues left behind.
Over time, bacteria and fungus continue to accumulate in the U-trap, repeatedly forming sludge and causing recurring water leaks.